Phoenix 2.8 kW Greenhouseheater
… efficient, cost-effective heating
The new Phoenix heater and ventilator was designed by professionals. This 2 in 1 superior stainless steel heater is ideally suited for use in the greenhouse or conservatory, thanks to its quiet, smooth running, powerful fan. The heater can either be floor mounted using the two floor brackets provided, or it can hang from the apex of the greenhouse using the hanging chains. The power selector switch gives you 3 heat output options-1.0 kW, 1.8 kW or 2.8 kW. The very accurate thermostat has a range of 0-26 °C which is suitable for most growing applications.
The "Phoenix" electric heater has been specially designed for greenhouses and conservatories. The technology that we have developed ensures that the temperature is maintained reliably at a reasonable level with no energy-wasting temperature peaks in the greenhouse.
The energy savings that are made are not due to half-harted heating but to sensible use of the available energy.
Click here and find out more as to "whats so special" about a Bio Green Phoenix Greenhouse Heater !!!
- 3 heat outputs
- 2 versions (both hanging / standing)
- 1 heater
- 3 YEAR GUARANTEE
- 8 Year sparepart availability gurantee with Bio Green !!!
The new Phoenix heater and ventilator was designed by professionals. This 2 in 1 superior stainless steel heater is ideally suited for use in the greenhouse or conservatory, thanks to its quiet, smooth running, powerful fan. The heater can either be floor mounted using the two floor brackets provided, or it can hang from the apex of the greenhouse using the hanging chains. The power selector switch gives you 3 heat output options-1.0 kW, 1.8 kW or 2.8 kW. The very accurate thermostat has a range of 0-26 °C which is suitable for most growing applications.
The "Phoenix" electric heater has been specially designed for greenhouses and conservatories. The technology that we have developed ensures that the temperature is maintained reliably at a reasonable level with no energy-wasting temperature peaks in the greenhouse.
The energy savings that are made are not due to half-harted heating but to sensible use of the available energy.
Click here and find out more as to "whats so special" about a Bio Green Phoenix Greenhouse Heater !!!
| Max heat output |
2800 W | |
| Fan output |
53 W | |
| Power supply |
230V |
|
| Current | 13 Amp | |
| Protective system |
IPX4 | |
| Thermostat range |
0 - 26 ° C |
|
| Air circulation | 460 m^3 |
|
| Weight | 4,85 kg |
|
| Dimensions (mm) |
length 410 height 330 width 220 |
|
| Order No.: |
PHX 2.8/GB |
- 3 heat output options of 1 kW, 1,8 kW, 2,8 kW
- Comes with hanging chains and floor mounting brackets
- Heating and cooling (Ventilation)
- Very quiet, smooth running fan
- Spray waterproof IPX4
- 3 year warranty
Chains for hanging included
Using the Phoenix Heater for thermostatically controlled air circulation in Summer
If you would like to us the Phoenix Heater as Air Ciruclation Fan in Summer this can easily be done with the FAN-only setting on the heater. If you like this Fan Only Setting to be Thermostatically Controlled ...lets say you wont the Fan to come on above a set temperature ie. 15°C when the sun comes up in the morning you can do this with our new controller THERMO 2 with the dual thermostat fuction (heating/cooling)
| Max heat output |
2800 W | |
| Fan output |
53 W | |
| Power supply |
230V |
|
| Current | 13 Amp | |
| Protective system |
IPX4 | |
| Thermostat range |
0 - 26 ° C |
|
| Air circulation | 460 m^3 |
|
| Weight | 4,85 kg |
|
| Dimensions (mm) |
length 410 height 330 width 220 |
|
| Order No.: |
PHX 2.8/GB |
- 3 heat output options of 1 kW, 1,8 kW, 2,8 kW
- Comes with hanging chains and floor mounting brackets
- Heating and cooling (Ventilation)
- Very quiet, smooth running fan
- Spray waterproof IPX4
- 3 year warranty
Chains for hanging included
Using the Phoenix Heater for thermostatically controlled air circulation in Summer
If you would like to us the Phoenix Heater as Air Ciruclation Fan in Summer this can easily be done with the FAN-only setting on the heater. If you like this Fan Only Setting to be Thermostatically Controlled ...lets say you wont the Fan to come on above a set temperature ie. 15°C when the sun comes up in the morning you can do this with our new controller THERMO 2 with the dual thermostat fuction (heating/cooling)
| Max heat output |
2800 W | |
| Fan output |
53 W | |
| Power supply |
230V |
|
| Current | 13 Amp | |
| Protective system |
IPX4 | |
| Thermostat range |
0 - 26 ° C |
|
| Air circulation | 460 m^3 |
|
| Weight | 4,85 kg |
|
| Dimensions (mm) |
length 410 height 330 width 220 |
|
| Order No.: |
PHX 2.8/GB |
- 3 heat output options of 1 kW, 1,8 kW, 2,8 kW
- Comes with hanging chains and floor mounting brackets
- Heating and cooling (Ventilation)
- Very quiet, smooth running fan
- Spray waterproof IPX4
- 3 year warranty
Chains for hanging included
Using the Phoenix Heater for thermostatically controlled air circulation in Summer
If you would like to us the Phoenix Heater as Air Ciruclation Fan in Summer this can easily be done with the FAN-only setting on the heater. If you like this Fan Only Setting to be Thermostatically Controlled ...lets say you wont the Fan to come on above a set temperature ie. 15°C when the sun comes up in the morning you can do this with our new controller THERMO 2 with the dual thermostat fuction (heating/cooling)